You can install accessories by Adding those in the Add Products step.

To do so, you need to have at least one wiZ device ( often a lamp) in range of that accessory at the time of installation to be able to detect it, and you will need in the process to select that lamp.

Then, select the type of accessory you want to add, and the device to detect it (so a device close to you and to the accessory).

You will then need to do an action with the accessory (press ON button, or press side button...). Please note that some accessories are on battery, so ensure the accessory has access to electrical power.

The accessory will be discovered.

Once you have discovered this may all the accessories you want to add, you can select Done and ensure configuration is finalized.

The accessory will then be visible in the list of Added products.

Once added, you will be able to decide which room is controlled by each accessory by moving them to the room. The room will then display all available configuration depending on the accessories.

If your users want to modify those later on, they can in the WiZ app and the WiZ Pro Dashboard, including refining targets in WiZ Pro Dashboard for example. WiZ Pro Dashboard allows setting targets for accessories which are at a different granularity, making those not visible in WiZ app nor in WiZ Pro Setup for the time being.